Tyre Sealant Formulated for Fleet & Commercial Carriers
This
Grade of Sealant will provide a high level of tyre protection for a
wide range of on-road vehicles with multi-axle construction. This protection
is important for large transporters used for suppliers to Supermarkets,
major industrial product manufacturers, the Motor industry, Buses, Coaches,
Minibuses and other markets where delivery on time is an essential requirement.
For Fleet Managers using a wide range of vehicle types and designs for
every form of product distribution, the reduction in downtime while
waiting for the tyre to be replaced would have significant cost savings.
Under inflation or slow air leaks are the leading causes of premature
tyre wear. The application of this Sealant to reduce these conditions
not only extends the life of the tyre but also increases fuel economy
by reducing tyre drag.
This Product also seals up to 95% of punctures (as large as 15mm) while dissipating heat within the tyre which increases tread life by up to 20%. It is guaranteed for the life of the tyre in regular use. Once a puncture occurs, the centrifugal force and the jet action of escaping air propel the sealant to the area of the problem. As the tyre flexes under load conditions, the multi-sized fibres and fillers are compressed to form a permanent plug. Air loss is minimal. This process can be repeated many times without the need of additional sealant. The installed cost compares favourably with the repair of one puncture, The correct amount of sealant for each tyre size must be installed. If more or less is applied this may cause the sealant to be less effective and costly.
In a typical fleetthe investment cost of Air-Seal Products Tyre Sealant
can be recouped within 45 days